Leveling Up: April 28-30
We’re heading to a conference! Orders placed during this time will be processed starting Thursday, April 30th, in the order received. We anticipate being back up to speed by the weekend. You’ll get a tracking email as soon as your order has been processed and is ready for shipping.
Have questions? Hit us up through the Contact Us link.
Corey @ 8-Bit Classics
GET THE NEW PSU — YOUR ATARI 520ST, 520ST+ OR 260ST (YES, IT EXISTS!) DESERVES IT.
The original Atari 520ST/260ST shipped with a large, heavy external switching PSU (typical ratings around 5 V @ 3 A, 12 V @ 0.03 A, −12 V @ 0.03 A). After ~40 years, capacitor aging and drift can cause instability or dangerous over-voltage spikes that threaten custom chips — especially when the old unit is overloaded.
Our Atari ST replacement PSU delivers 50 W (55 W peak) combined output — over 2× the headroom of typical originals — yet it’s about 2× smaller and weighs ~0.4 kg, saving space on your desk.
Many ST setups today include modern enhancements: SD/FDD emulators, CF/SSD HDDs, HDMI/VGA adapters, Wi-Fi modems, RAM upgrades, and accelerators. These increase the load and demand a clean, stable PSU. A stressed vintage supply becomes unpredictable.
Beware of “cheap replacements” that omit the −12 V rail (needed, e.g., for RS-232-C serial) or skip a proper main ON/OFF switch to cut costs. Our approach: meet the original three-rail spec with more current headroom, low ripple & noise, and a robust mechanical rocker switch for safety and real energy saving (no pseudo-standby).
UNIQUE FEATURES & QUALITY: THE ABSOLUTE BASICS OF A MODERN ATARI 520ST (260ST) PSU
Standard Atari ST External PSU features:
- Compatibility: ATARI 520ST, 520ST+, 260ST, 260ST+
- Stabilized & filtered 5 V DC up to 4.0 A (4.4 A peak)
- Stabilized & filtered 12 V DC up to 2.0 A (2.2 A peak)
- Stabilized & filtered −12 V DC up to 0.5 A (0.55 A peak)
- Active & passive over-voltage protection on the main 5 V rail
- Over-current protection on all rails
- Fully isolated & AC-side fused input
- Reliable Power ON/OFF switch
- 1.8 m output cable with 7-pin round DIN (female)
- Detachable AC input cable (all versions)
- Weight ~0.4 kg (≈2× lighter than the original Atari ST PSU)
- Runs cool thanks to high-efficiency design
- Built on a genuine Mean Well RPT-60B industrial/medical-grade module (low ripple & noise)
GO BEYOND THE BASICS: ADD THE ATARI ST ADJUST & PROTECT MODULE
NEW Adjust & Protect LED Module add-on — advanced power features:
- 5 V fine-tuning trimmer (approx. 4.9–5.3 V)
- Power-good LED (green)
- Redundant, fast over-voltage protection for the 5 V line
- Ultra-fast TVS for spike suppression
- Redundant, resettable over-current protection on 5 V
- Extra ripple reduction via low-ESR capacitor filtering
Additional information
| Weight | 30 oz |
|---|

What others are saying
There are no contributions yet.