Commodore 64/128/16/+4 8-Pin DIN S-Video & RCA AV Cable
$11.99 – $13.99
Treat your Commodore 64, 128, 128D, C116, 16, and +4 the way it was meant to, in the best picture quality available to it without modding your computer.  Connect a Commodore Computer (with the 8-pin DIN AV Connector) to either an S-Video Connector or Composite Video RCA. It also includes left and right audio connectors. Enjoy your Commodore at its best!
- Over 5 Feet in length
Options:
- 300 Ω resistor - The resistor will offer better picture quality on an LCD. It doesn't make much difference on a standard CRT monitor/TV.
- Stereo Audio - If your C64 has been modded to support stereo audio, we can wire up the red RCA connector to Pin 7. Compatible with SID2SID, SwinSID, DualSID, and others.
To connect your computer to a TV with HDMI, check out the Armor3 Composite AV to HDMI Adapter that will take the output from this cable and upscale the output, and make it compatible with HDMI monitors!
NOTE: In earlier versions of the Commodore 64, Commodore didn't include the Chroma or Luminance connections required for S-Video. Â If your Commodore 64 only has a 5-Pin AV Connector, you will not be able to use this cable. Please look at our standard AV cable instead.
| LCD Comparison using S-Video (Shared by one of our customers) | |
| Without Resistor | With Resistor |
 |  |
Additional information
| Weight | 6 oz |
|---|
Share your thoughts!
Let us know what you think...
What others are saying
Shipping Policy
Thank you for visiting and shopping 8bitclassics.com. The following are the terms and conditions that constitute our shipping policy.Shipment Processing TimeAll orders are processed within 1 to 3 business days. Orders are not shipped or delivered on weekends or holidays.If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email.Shipping rates & delivery estimatesShipping charges for your order will be calculated and displayed during checkout. Options will vary based on speed of delivery including costs. Delivery delays can occasionally occur and out of our control.Shipment to P.O. boxes or APO/FPO addresses8bitclassics.com ships to addresses within the U.S., U.S. Territories, and APO/FPO/DPO addresses.Shipment confirmation & Order trackingYou will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.Customs, Duties and Taxes 8bitclassics.com is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).Damages
8bitclassics.com is not liable for products damaged or lost during shipping unless it is found that the packing of the order was inadequate. If you received your order damaged, please contact the shipment carrier to file a claim.Please save all packaging materials and damaged goods before filing a claim.International Shipping PolicyWe currently ship to the following countries. Your order will be cancelled and refunded if your country is not listed here:All countries.
Refund Policy
RefundsOnce we receive your item, we will inspect it and notify you that we have received your returned item. We will immediately notify you on the status of your refund after inspecting the item. If your return is approved, we will initiate a refund to your credit card (or original method of payment).You will receive the credit within a certain amount of days, depending on your card issuer's policies.
Cancellation / Return / Exchange Policy
ReturnsYou have 14 calendar days to return an item from the date you received it. To be eligible for a return, your item must be unused and in the same condition that you received it. Your item must be in the original packaging.You will need to contact us before returning your item and it needs to have the a copy of the original receipt or invoice included. If we receive a product back without prior authorization, at our discretion, it may not be refunded and only returned to you at your expense.ShippingYou will be responsible for paying for your own shipping costs for returning your item. Shipping
costs are nonrefundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Tom Gosser (verified owner) –
Purchased with 300Ω resistor. Works great! I installed an FPGASID and the stereo output was another feature of this cable I was looking for. Very high quality. Shipping was very quick. I am very pleased with this purchase. Thank you!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Bong Choi –
I purchased this with the 300Ω resistor. I use the s-video on an old school 4:3 LCD tv. Picture is clear. Even better when I connect to a crt tv. Great product. I’ve bought a couple of cables for my commodore and TI-99/4A and both products are perfect. Makes my retro gaming a great experience. Thanks guys.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Christian Krautwald (verified owner) –
This cable is great! The quality up on my 32″ LCD is clear and allows me to work on my C64 with no issues. Having the left and right audio channel is great also, as the entire purpose of my C64 is to make noise for a music project. This is a most have cable, and 8-bit does a great job on getting the order out. Each order has arrived within 5 business days.
Upvote if this was helpful (2) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
William Herd (verified owner) –
Good quality product and actually fixed my problem I was having with my original 35 year old cable. Cory et al are doing it right. 🙂
Bil Herd – Old Commodore Engineer.
Upvote if this was helpful (3) Downvote if this was not helpful (0) Flag for removal
Olivier Lau (verified owner) –
The resistor option makes it an excellent product for an LCD screen. I have another cable which has no resistor and the display is not as good (same differences as on the pictures above).
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Joseph Norton (verified owner) –
Wonderful! It’s been a long time since I have had the Commodore 128 in action as my 1902A monitor is out of commission. This cable has got me going. (got the 300 Ohm resistor as well). The RCA jacks saved me as I am going through an S Video to VGA adapter and the RCA jacks give me an output to the audio switchbox. This is a nerd dream! Thanks again.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
JohnTalent –
What connector is the S-Video output (the TV end)? Is it male or female? Also, how many pins is the s-video output of the connector. Thank you very much. I look forward to hearing from you.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
It is a male 4-pin connector on the cable.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Neal Chapman (verified owner) –
Without this cable my C64 would be completely useless. Working great on a flat panel with the added resistor, video over RF to a flat panel was illegible. This also allows me to hook the audio out into my sampler. The C64 never looked or sounded so good!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
Wow, beautiful picture. Thanks for sharing!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Alex Evans (verified owner) –
I got the version with the 300 Ohm resistor. Running the output through a S-Video to HDMI on an S-Video to VGA converter or directly into a DLP projector’s S-Video connector results in high quality video output.
In addition the ordering process was easy, prices were reasonable and the cable was received quickly.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Brian Melcer (verified owner) –
I purchased the one with the 300 ohm resistor. I was extremely pleased with the quick turnaround and communications from the seller. After nearly two months of excuses and no product shipment for a similar product from another vendor in the Commodore space–this was a breath of fresh air!
I have used the device on an older LCD tv as well as my HD monitor through an upscaler, and the device performs as expected and the picture quality is good.
Will definitely consider 8bitclassics again for any of my retro needs.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jose Gueits (verified owner) –
I also got the cable with the resistor and stereo audio… The item I purchased was well worth buying, and the company was excellent as well with their customer service. The cable worked like a charm, especially when I also used a S-Video/VGA converter. I recommend this item and will purchase from this company for whatever else I have a need for. Obviously, I am a satisfied customer!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Dan Olsen (verified owner) –
I dug my old C64 out of the garage for a milestone birthday get together with some old friends to surprise them. After researching how the heck to hook up the C64 to a modern TV, I discovered 8-Bit Classics. I ordered the version with the 300Ω resistor and it worked like a charm! Plus, Corey was super nice on fulfillment: I was on a tight timeline and he went out of his way to make the adapter and ship it the same day. As a result, I received it in time and we had a great time playing old games 🙂
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Emily Christ (verified owner) –
Works perfectly, just as you’d expect. I got the one with the extra resistor and it looks great on any LCD I’ve tried it on.
I’ve only noticed one problem, and that’s a bright green smudge on the right hand side of the screen when my C64 is connected to a RetroTink Mini HDMI upscaler. I don’t get the green smudge in any other configuration, so it might be a problem with the RetroTink.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
Thank you for sharing. If possible could you post a picture of the smudge when using the RetroTink?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Ryan A. (verified owner) –
Absolutely zero regrets buying this cable from 8BitClassics.com. I chose my cable with the optional resistor and it arrived less than a week after placing the order. I must say I have never witnessed sharpness anywhere near as good as this from my UK PAL Commodore 64C. S-Video vs Composite is a night & day difference folks, believe me! I have the S-Video end plugged into an Orei XD-1090 (available from Amazon) to convert the PAL input signal to NTSC, and then from there it’s HDMI-out to my 65″ Samsung Series 8 TV. The result is what you see in the attached picture. Truly amazing! I’ll be sure to send people your way from my YouTube channel. Thanks again.
Upvote if this was helpful (2) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
Thank you! Beautiful picture by the way.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Jeff Walrath (verified owner) –
Well made, well constructed and works as advertised. Very nice quality. I have ordered again already… Definitely worth getting 300 ohm resistor. Fast shipping as well.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Matthew Coffron (verified owner) –
I’ve been using this for a few months with both a C64 and a C128 and have zero complaints. It works as it should. Great product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kevin Dorff (verified owner) –
I am working on some C64s and wanted the best possible video signal (without modding the C64). The SVideo cable with the resistor is working great for me. Would happily buy again.
Upvote if this was helpful (2) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Question
Gareth Poole –
Is there any disadvantage to getting the stereo version if I don’t have the stereo mod? Is the mono version mostly just there to make it more convenient to get the signal out of both channels out of a stereo TV? I suppose if there is that slight advantage it might make sense to get the mono version. Thanks for reading and I hope to get one soon.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
8-Bit Classics –
It depends on the TV. Yes, the left & right channels on a standard mono cable will just reproduce the signal on both channels. But this can sometimes create feedback as some users have experienced and they just leave one channel unplugged. So for the stereo version, as long as nothing is connected to the new stereo pin on the C64, it should be fine having it plugged in or unplugged.
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
John Goad (verified owner) –
I ordered this on a late Friday evening and to my shock it was prepared and shipped next day. They showed examples of what the resister did and was confirmed by others. Just from this alone I will order again when the time arises.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
david (verified owner) –
I picked up a couple C64s in an estate sale that didn’t have any video cables. A friend pointed me your way and I got one with the resistor and noise reduction. I’m really impressed with the build quality and the materials used. The VIC-II I’m using is one of the old ceramic ones and the output through this cable is fantastic. The attached screenshot isn’t even using the s-video; this is just RCA. I would absolutely buy again.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kristian Rickert (verified owner) –
Ordered it – worked right OOTB. Ordered a second cable for the VIC 20 -looking forward to getting that too. Support 8bit classics! Just get it.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Michael Pongracz (verified owner) –
So my ‘actual’ review of the cable (C64 w/resistor) will have to wait until I get it. Ordered originally early in January and thru no fault of my own (postal incompetency and apparently crappy neighbours), I never actually received my cable. That’s where the amazing CSR comes in… I reached out to Corey and he was completely understanding and helpful, offering to send out a replacement if it didn’t turn up. Just a fantastic guy and a real bright spot in this classic console industry. So thanks again Corey and I’m just looking forward to firing up my old C64 in the studio here when the replacement arrives! No if only I could replace my neighbours…. LOL!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Michael Pongracz (verified owner) –
Want to follow up on my initial review. Can’t begin to thank Corey enough for all his amazing customer service in going above and beyond to help out my situation. New cable was received (and it actually made it to my house this time!) and works unbelievably well. Being able to fire up my C64 in my studio and reliving some fantastic childhood memories on the original gear was perfect. Thanks again and seriously top shelf product and service!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Flag for removal
Wolfgang Bochar (verified owner) –
It’s a great cable, connected from by 128D to Sony Studio preview monitor. Signal is clean and the cable decent length. Shipping was fast, was surprised about that. Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Steven Bissen (verified owner) –
Happy with the way this product is working for me. A gender-changing connectors would be nice addition though especially with the rca audio.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
Thank you for the review and comment. Can you explain the need for having female RCA connectors? We are looking at a female s-video/rca adapter like our composite one. Just trying to find a good option for a cable.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
aaron (verified owner) –
High-quality, well-designed cable. I got the version with the resistor to connect my C128’s (40-column/C64-mode) output to an LCD TV, and image quality is fantastic. And it was shipped immediately and arrived quickly. Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Kristian Rickert (verified owner) –
This is a straightforward product and I can not see any noise elements on the screen. It works with stereo Sid. Highly recommend
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Smith Nash (verified owner) –
The best part about this cable is the fact it is built well. It’s true you can take the wrong DIN plug using the 270 degree pin arrangement and remove pin 6 and 7 because they are not used to make the C64, Atari cable. This cable is true to the original by using the 262 degree pin arrangement making this a more authentic cable with the added benefit of an S-Video plug.
After plugging the cable into my C64 from 1983 I used the S-Video cable end to attach to a Vizio TV monitor, I found the image quality quite sharp and stable. Only the C64’s traditional “jail bars” were faintly visible. I switched over to the Composite plug and the image quality was also good but not as good as the S-Video which is typical. Composite has to combine Luma, Chroma, and Sync into one cable and that inherently causes some cross interference. This NOT the fault of the cable but due to the way the C64 video circuit was designed.
All in all I am very happy with the cable and hope it will provide me a long service life.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Joshua Dolan (verified owner) –
Our living room VISIO 50in 4k TV refused to display an image from the SX-64 with the resistor version of this cable. The TV was detecting the signal and would blank out the no signal message when connected, but nothing was ever displayed. I have used other composite devices on the TV and they do work so I know it isn’t the TV. Just one of those things I suppose. However, connected to my old Dell LCD monitor that has just about every input you can think of as well as a late generation RCA Truflat 14in TV the picture looks really really good… better than I ever remember a C64 looking when I was a kid. I am totally happy with the purchase.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
pov1mtfc (verified owner) –
Excellent quality cable. Went with the 300ohm resister option for an improved s-video output and the ANR option which reduces the noise output from the sid chip. Listening to 100’s of sid tunes at the moment which sound much clearer. Thanks Corey I’ll be back for more.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Michael Bailey (verified owner) –
The cable arrived quickly and without fuss. The cable is very nice quality, and it shows when in use, even when just using it through a cheap composite to HDMI converter. There aren’t enough U.S. based outfits like 8-Bit Classics (quicker shipping, no customs), and I sincerely appreciate that it exists. I would happily buy more cables from this place!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
bluebob (verified owner) –
This cable purchased with 300Ω resistor works fine itself but doesn’t cooperate with Armor3 Composite AV to HDMI Converter.
After connecting to my TV the picture is much better than it was with my old cable.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Admin 8-Bit Classics –
Thanks for the notification. The Armor3 is a low cost method to connect Composite video on the cable to HDMI. Ideally you would want a scan doubler for the best image or an addon module to your C64 to provides RGB output.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal